Shop
Showing 1–48 of 639 results
-
2 Core, Cable (Full Rolls)
1 PAIR 0.8MM² SHIELDED CABLE KNX CERTIFIED – 100M ROLL
1 Pair, 0.8mm, Shielded, KNX Certified Cable (MAS1PKNX)
Certified cable for KNX technology the worldwide standard for all applications in home and building control, ranging from lighting and shutter control to various security systems, heating, ventilation, air conditioning, monitoring, alarming, water control, energy management, smart metering as well as household appliances, audio/video and lots more.
Flame Retardant, Low Smoke, Zero Halogen497/15174/18 CERTIFIED
SKU: MAS1PKNX-100 -
Alarm Products, Battery
12VDC 7AH SEALED LEAD ACID BATTERY – 65 X 95 X 150MM W X H X L
12V 7.0Ah Sealed Lead Acid battery.
Dimensions (LxWxH) 150mm x 65mm x 95mm
Weight 2Kg
Lug type terminals– Commonly used in security alarm systems as back-up battery.
***Recycling program for this item***
Bring us your old 12V 7Ah SLA batteries for recycling and for every battery your return we will give you .50c off your regular price of the next SA12-7 purchased from us.SKU: SA12-7 -
-
Accessories, Timer Board
ALTRONIX 4CH 365 DAY 24 HR EVENT TIMER BOARD ONLY
Altronix AT4B is an extremely versatile 24 Hour 365 Day Event Timers designed to support a wide range of applications. Such applications include: Home and Building Automation, Security, Access Control, Lighting Control, Etc.
SKU: AT4B -
Power Supplies, PSU
ALTRONIX ACCESS POWER CONTROL 4 X 12-24V AC/DC OUTPUT BOARD
Altronix ACM4 converts one (1) 12 to 24 VAC or VDC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form C contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM4 will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes.
Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outSKU: ACM8 -
Power Supplies, PSU
ALTRONIX ACCESS POWER CONTROL 8 X 12-24V AC/DC OUTPUT BRD – PTC FUSE – UL Listed
Altronix ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2.5A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes.
This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eiSKU: ACM8CB -
Ethernet over Coax, Transmission
ALTRONIX EBRIDGE 01 CH EOC TRANSCEIVER – 100 MBPS @ 300M – 30W POE
Altronix eBridge100TM EoC hardened transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE/PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options and is powered by an external midspan or endspan. The receiver passes PoE/PoE+ power over the same coax cable to the eBridge100TM transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate a cost-effective, simple way to replace legacy analog products with new IP devices over existing coax up to 300m. When paired with the eBridge100RM EoC Receiver, the eBridge100TM will pass 100Mbps full duplex data and PoE/PoE+ over CAT5e (or higher) up to 500m.
SKU: EBRIDGE100TM -
Ethernet over Coax, Transmission
ALTRONIX EBRIDGE 16 CH EOC RECEIVER HUB – 100 MBPS @ 300M – 30W POE
Altronix eBridge1600PCRM and eBridge100TM/eBridge100ST are CAT5e to Coax cable Ethernet adapters/Media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 100Base-T Full Duplex Ethernet digital communication to be transmitted over Coax cable. The eBridge1600PCRM receivers are powered by any UL Listed, PoE midspan or endspans and pass power over the coax to the eBridge100TM/eBridge100ST hardened transceivers. This enables the eBridge1600PCRM to be used in a managed manner, allowing for remote camera reset. The eBridge100TM/eBridge100ST, in turn, passes PoE+ compliant power to a PoE enabled camera or IP device. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission and power over the Coax is possible up to 300m in comparison to 100m Ethernet maximum distance.
SKU: EBRIDGE1600PCRM -
Ethernet over Coax, Transmission
ALTRONIX EBRIDGE 16 CH EOC RECEIVER HUB – 25 MBPS @ 500M
The eBridge16CR is a 16 channel ethernet over coax rack mount receiver. The eBridge16CR enables fast 10/100Base-T Ethernet digital communication to be transmitted over coax cable. This unit is designed to be used with eBridge1CT transceivers. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition the use of coax enables data transmission to be extended over 500m (over four times the 100m Ethernet maximum length), eliminating the need for repeaters. At the same time the units can combine Composite Video Signal with the Ethernet data enabling connection to an analog input on a monitor or matrix switch.
SKU: EBRIDGE16CR -
Accessories, Timer Board
ALTRONIX EVENT TIMER – 1 SEC TO 60 MINS 12VDC
Altronix DTMR1 programmable timer is suitable for many functions that require a timed operation e.g. Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher. A new feature has been added which provides a momentary relay activation at the end of a desired timing cycle. This feature eliminates the need for having to use two (2) timers to achieve this function. Another new feature will cancel (interrupt) timing cycle and reset timer if desired.
SKU: DTMR1 -
Clearance, Transmission
ALTRONIX HUBWAY 16 CH UTP TRANSCEIVER HUB VIDEO 228M PTC – Run Out Item
HubWay16D Passive UTP Transceiver Hub with Integral Camera Power transmits UTP video, RS422/RS485 data and power over a single CAT-5 or higher structured cable. Unit provides 16 camera channels in a space saving 1U EIA 19 rack mount chassis which may be rack, wall, or shelf mounted. Video transmission range is up to 750 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv, HubWayAv2, HubWayDv or HubWayDvi Video Balun/Combiners. Unit also features individually selectable 24VAC or 28VAC PTC protected outputs with surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with Integral Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay16D. In addition, HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs
This is a Run Out Item – stock is only available until we run outSKU: HUBWAY-16D -
Clearance, Timer Board
ALTRONIX MULTI-PURPOSE TIMER BOARD 1 SEC – 60 MIN – RUN OUT ITEM
6062 programmable timer is suitable for many functions that require a timed operation e.g. Access Control Applications, Siren/Bell Cut Off Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional functions include: One Shot, Delayed Release, Delayed Operate, Delayed Pulse and Pulser/Flasher.
Input
12VDC or 24VDC operation is selectable.
Current Draw
Stand-by: 3mA, Relay energized: 40mA.
Relay
Selectable relay activation at the start or end of the timing cycle.
One (1) second momentary relay activation at the end of the timing cycle (eliminates the need to use two (2) timers for this function).
Features
Triggers via positive DC (+) voltage, dry contact closure, or removal of contact closure.
Quick and extremely accurate time range adjustment from 1 second to 60 minutes.
Built-in reset feature which cancels timing cycle.
Repeat (flasher/pulse) mode.
Visual Indicators
LED indicates relay is energized.This is a Run Out Item – stock is only available until we run out.
SKU: 6062 -
-
-
-
Power Supplies, PSU Cabinet Only
ALTRONIX PSU/CHARGER 220VAC INPUT – 8 X 24VDC OUTPUT 10AMP CABINET UL Listed
Power Supplies, PSU Cabinet OnlyALTRONIX PSU/CHARGER 220VAC INPUT – 8 X 24VDC OUTPUT 10AMP CABINET UL Listed
AL1024ACM220 converts a nominal 220VAC 60Hz input into eight (8) independently controlled 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 10A continuous supply current. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for a
SKU: AL1024ACM220 -
Accessories, Timer Board
ALTRONIX TWO STAGE TIMER BOARD – 12 OR 24V AC OR DC
Tempo2 is a universal two stage timer for applications that require timed operations. A delayed egress feature will trigger a 1 to 60 second door release. Applications include daily/weekly test mode, one shot, door prop alarm, timed door annunciate, cut-off timer, alarm swinger eliminator, etc. Digital display facilitates ease of programming and real time information.
SKU: TEMPO2-220 -
Card, Storage
APACER 64GB MICRO SDXC UHS-I CLASS10 CARD
Apacer AH356 16GB USB 3.1 Flash Drive Backwards compatible with USB 3.0, USB 2.0
Apacer AH356 Galaxy Express USB 3.1 Gen 1 flash drive is inspired by stylish bullet train. With large capacity up to 64GB, AH356 will bring users a sufficient storage. The slider design is intuitive to use. The easy push-and-slide feature protects the port of AH356 away from dust.
Let’s share files with someone important anytime and anywhere!SKU: MEMAPC81064 -
Dropper Poles, Joiner
ASD 20MM POLE ATTACHMENT 50MM LONG
This join is designed to attach a camera using NPT thread 20mm diameter to ASD camera pole.
Item used for older style cameras and is available while stock lasts.
This is a Clearance item – clearance is either old shelf stock with expired warranty or refurbished item being cleared at or below cost. Only current stock is available.
SKU: NPT-CAMPOLEATTACH -
Clearance
AXIS INDOOR 3MP TDN FULL BODY CAMERA 4 TO 10MM LENS – Run Out Item
Superb video quality in HDTV 1080p or 3 megapixel
P-Iris, a precisely controlled iris for optimal image clarity
Multiple H.264 and Motion JPEG video streams
Digital PTZ and multi-view streaming
Easy installation with focus assistant, remote back focus and pixel counterThis is a Run Out Item – stock is only available until we run out.
SKU: AX-P1346 -
Brackets, Monitor Bracket
BRATECK 23′-42′ PIVOTING WALL MOUNT BRACKET – TILT AND SWIVEL
BRATECK 23”-42” Pivoting wall mount bracket.
Tilt and swivel.
Supports VESA 75×75,100×100,200×100,200×200.
Max Load 30Kgs.
Hidden cable management.
Colour Black.Economy Pivoting Wall Mount
LCD-501A is designed to fit any 23-42 Flat Panel TV up to 30kgs/66lbs. Adjustable swivel arm and tilt plate provide maximum viewing flexibility.
SKU: LCD-501A -
Brackets, Monitor Bracket
BRATECK MONITOR WALL BRACKET 13-42 INCH 20KG – EXTEND 417MM TILT/SWIVEL ANTI THEFT
Brackets, Monitor BracketBRATECK MONITOR WALL BRACKET 13-42 INCH 20KG – EXTEND 417MM TILT/SWIVEL ANTI THEFT
BRATECK 13-42” Anti-Theft Full- Motion Monitor/TV Wall Mount. Anti- Theft Locking Hole for Additional Security (Padlock Required). Max VESA 200×200. Max Load 20Kgs. Max Arm Extension 417mm. Black Colour.
The LCD-141C is an articulating wall mount for 13~42 flat-panel TVs up to 20kgs/44lbs. It allows 360 of effortless rotating with the push of a finger, making it easy to roll from portrait to landscape viewing. Full motion allows maximum flexibility tilts, swivel, pan and extend your TV up to 417mm from the wall in every direction for easy viewing from any seat in a room. In-arm cable clip routes cables for a clean appearance. Slide-in VESA plate ensures easy installation. VESA-compatible fits 75×75, 100×100, 200×100 and 200×200 hole patterns.
SKU: LCD-141C -
Brackets, Monitor Bracket
BRATECK UNIVERSAL IPAD 2/3/4/AIR. ANTI-THEFT FLOOR STAND
The new PAD26-04 anti-theft steel iPad freestanding kiosk with security lock is designed for protecting your tablet in public.
A holder with 90 a rotate and tilt function for multiple viewing angles. Power cable and other cables can run along the tube for better cable management. The steel base is solid and stable. Ideal for use in education, health-care, corporate, retail and point of sale environments.Suitable for use with the BTM-213.
SKU: PAD26-04 -
Licence
CARMEN FREEFLOW 1YR UPGRADE FEE
* Integration with internal and external databases
* Interaction with access control equipment (gates)
* Operation with Virtual Loop or Physical Loop
* Unlimited database for plate registration
* Read license plate of vehicles at any speed (Limited only to the camera
capture capabilities)
*Allow searching by date, time, plate, character set, partial plate &
camera
* Suspicious car reports
* Prints photos of car license platesSKU: CAR-FF-UPG-1YR -
Licence
CARMEN FREEFLOW UPGRADE ACT FEE
* Integration with internal and external databases
* Interaction with access control equipment (gates)
* Operation with Virtual Loop or Physical Loop
* Unlimited database for plate registration
* Read license plate of vehicles at any speed (Limited only to the camera
capture capabilities)
*Allow searching by date, time, plate, character set, partial plate &
camera
* Suspicious car reports
* Prints photos of car license platesSKU: CAR-UPGR-REACT -
Licence
CARMEN FXMC USB HARDWARE KEY
* Integration with internal and external databases
* Interaction with access control equipment (gates)
* Operation with Virtual Loop or Physical Loop
* Unlimited database for plate registration
* Read license plate of vehicles at any speed (Limited only to the camera
capture capabilities)
*Allow searching by date, time, plate, character set, partial plate &
camera
* Suspicious car reports
* Prints photos of car license platesSKU: CAR-FXMCUSBHWKY -
Licence, VMS Channel Licence
COMMAND ENTERPRISE BASE 10 LICENCE BUNDLE Free
Command Enterprise Software Starter License Bundle – includes Command Enterprise base software to be used to manage multiple March Networks recording platforms. Includes 10 Hybrid, Tribrid and IP Recorder Connection Licenses.
SKU: 37546 -
Licence, VMS Channel Licence
COMMAND ENTERPRISE RECORD SERVER – SINGLE CAMERA LICENCE
Command Recording Software Channel License for a single camera when connecting to Command Enterprise. For use with Command Recording Software (27203). Also requires 1-year Software Maintenance Agreement (p/n 24315).
Powerful video management software (VMS) supporting up to 500 cameras.
Highlights:
– Windows-based recording software supporting up to 500 cameras
– Runs on a variety of platforms (individual workstations, March recorders, commercial servers and large-scale virtual machines)
– Convenient external recording options (DAS, NAS and SAN)SKU: 27208 -
Licence, VMS Channel Licence
COMMAND ENTERPRISE SOFTWARE BASE LICENCE
Command Enterprise Software BASE License – includes Command Enterprise base software to be used to manage multiple March Networks recording platforms. Includes all Hybrid, Tribrid and NVR Recorder Connection Licenses.
March Networks’ Command Enterprise software is an advanced system management software for distributed enterprise video surveillance applications.
Highlights:
– Supports thousands of video recorders and video channels
– Centralised system and user management
– Mass firmware and configuration updates
– VMware High Availability and LDAP/Active Directory integrationsSKU: 27207 -
Licence, VMS Product Integration
COMMAND GALLAGHER ACCESS CONTROL PLUGIN
Single software license that unlocks the Gallagher Command Centre v7.7 plug-in features in a single CES server.
Any recorder, Visual Intelligence or CRS, managed by the CES server can be accessed through Gallagher Command Centre Client once the license is applied (additional licensing may be required from Gallagher).SKU: 36740 -
Licence, VMS Channel Licence
COMMAND PROFESSIONAL RECORD SERVER – SINGLE CAMERA LICENCE
Command Recording Software Channel License – For use with Command Recording Software 27203. One per channel. Also requires 1-Year Software Maintenance Agreement p/n 24315.
March Networks’ Command Enterprise software is an advanced system management software for distributed enterprise video surveillance applications.
Highlights:
– Supports thousands of video recorders and video channels
– Centralized system and user management
– Mass firmware and configuration updates
– VMware High Availability and LDAP/Active Directory integrationsSKU: 27205 -
-
Licence, VMS Channel Licence
COMMAND RECORD SOFTWARE SERVER REDUNDANCY FAILOVER LICENCE
Command Recording Software Redundant/Failover Channel License when connecting to Command Enterprise – for a single redundant recording camera. Also requires 1-Year Software Maintenance Agreement (p/n 24315).
SKU: 27209
